CERN Accelerating science

Početna stranica > CERN Departments > Accelerators & Technology Sector > Accelerators & Beams Articles > SC Articles

SC Articles

Pretražite 26 zapise za:
Savjeti za pretraživanje :: Jednostavno pretraživanje
Added/modified since: do:
Sortiraj po: Prikaz rezultata: Oblik izlaznih podataka:
Najnovije dodano:
2008-06-24
05:05
The fingerprint method for characterization of radioactive waste in hadron accelerators / Magistris, M (CERN) ; Ulrici, L (CERN)
Beam losses are responsible for material activation in most of the components of particle accelerators. The activation is caused by several nuclear processes and varies with the irradiation history and the characteristics of the material (namely chemical composition and size). [...]
2008 - Published in : Nucl. Instrum. Methods Phys. Res., A 591 (2008) 343-352

Detaljnije - Slični zapisi
2007-11-17
04:28
Measurement and Calculation of High-Energy Neutron Spectra behind Shielding at the CERF 120 GeV/c Hadron Beam Facility / Nakao, N (SLAC, USA) ; Taniguchi, S (JASRI, Hyogo, Japan) ; Roesler, S (CERN) ; Brugger, M (CERN) ; Hagiwara, M (CYRIC, Tohoku Univ., Sendai, Japan) ; Vincke, H (SLAC, USA ; CERN) ; Khater, H (SLAC, USA) ; Prinz, A A (SLAC, USA) ; Rokni, S H (SLAC, USA) ; Kosako, K (Shimizu Corporation, Tokyo, Japan)
Neutron energy spectra were measured behind the lateral shield of the CERF (CERN-EU High Energy Reference Field) facility at CERN with a 120 GeV/c positive hadron beam (a mixture of mainly protons and pions) on a cylindrical copper target (7-cm diameter by 50-cm long). An NE213 organic liquid scintillator (12.7-cm diameter by 12.7-cm long) was located at various longitudinal positions behind shields of 80- and 160-cm thick concrete and 40-cm thick iron. [...]
2008 - Published in : Nucl. Instrum. Methods Phys. Res., B 266 (2008) 93-106

Detaljnije - Slični zapisi
2007-11-17
04:28
Shielding data for 100-250 MeV proton accelerators : double differential neutron distributions and attenuation in concrete / Agosteo, S (Polytechnic of Milano, Milano, Italy) ; Magistris, M (CERN) ; Mereghetti, A (Polytechnic of Milano, Milano, Italy ; CERN) ; Silari, M (CERN) ; Zajacova, Z (CERN ; Slovak Univ. of Technology, Bratislava, Slovak Republic)
Double differential distributions of neutrons produced by 100, 150, 200 and 250 MeV protons stopped in a thick iron target were simulated with the FLUKA Monte Carlo code at four emission angles: forward, 45°, transverse and 135° backwards. The attenuation in ordinary concrete of the dose equivalent due to secondary neutrons, protons, photons and electrons was calculated. [...]
2007 - Published in : Nucl. Instrum. Methods Phys. Res., B 265 (2007) 581-598

Detaljnije - Slični zapisi
2007-11-16
04:43
Dosimetry in radiation fields around high-energy proton accelerators / Agosteo, S (Milan Polytechnic ; INFN, Milan) ; Rollet, S (Seibersdorf, Reaktorzentrum) ; Silari, M (CERN) ; Theis, C (CERN)
Radiation dosimetry at high-energy proton accelerators is a difficult task because of the complexity of the stray radiation field. A good knowledge of this mixed radiation field is very important to be able to select the type of detectors (active and/or passive) to be employed for routine area monitoring and to choose the personal dosimeter legally required for estimating the effective dose received by individuals. [...]
2008 - Published in : Radiat. Meas. 43 (2008) 1024-1032

Detaljnije - Slični zapisi
2007-11-07
04:38
Monte Carlo simulation of background characteristics of gamma-ray spectrometers : a comparison with experiment / Povinec, P P (International Atomic Energy Agency, Marine Environment Laboratory, Monaco ; Comenius Univ., Bratislava, Slovakia) ; Vojtyla, P (CERN) ; Comanducci, J F (International Atomic Energy Agency, Marine Environment Laboratory, Monaco)
2008 - Published in : J. Environ. Radioact. 11 (2008) 163-208

Detaljnije - Slični zapisi
2007-10-30
04:39
Environmental aspects and impacts of CERN / Vojtyla, Pavol (CERN)
2004
In : 18th International Conference On Informatics For Environmental Protection, Part II, CERN, Geneva, Switzerland, 21 - 23 Oct 2004, pp.454-456

Detaljnije - Slični zapisi
2007-10-25
04:34
The matrix method for radiological characterization of radioactive waste / Magistris, M (CERN)
Beam losses are responsible for material activation in some of the components of particle accelerators. The activation is caused by several nuclear processes and varies with the irradiation history and the characteristics of the material (namely chemical composition and size). [...]
2007 - Published in : Nucl. Instrum. Methods Phys. Res., B 262 (2007) 182-188

Detaljnije - Slični zapisi
2007-04-18
17:46
Comparison of 2-D Magnetic Designs of Selected Coil Configurations for the Next European Dipole (NED) / Toral, F (CIEMAT, Madrid, Spain) ; Devred, Arnaud (Saclay ; CERN) ; Felice, H (Saclay) ; Fessia, Paolo (CERN) ; Loveridge, P W (RAL, Abingdon, England) ; Regis, Federico (CERN) ; Rochford, J (RAL, Abingdon, England) ; Sanz, S (CIEMAT, Madrid, Spain) ; Schwerg, Nikolai (CERN) ; Védrine, P (Saclay) et al.
The Next European Dipole (NED) activity is developing a high-performance Nb$_{3}$Sn wire (aiming at a non-copper critical current density of 1500 A/mm2 at 4.2 K and 15 T), within the framework of the Coordinated Accelerator Research in Europe (CARE) project. This activity is expected to lead to the fabrication of a large aperture, high field dipole magnet. [...]
CERN-AT-2007-009-MCS; CARE-Pub-06-013; CARE-Pub-2006-013.- Geneva : CERN, 2007 - 6 p. - Published in : IEEE Trans. Appl. Supercond. 17 (2007) 1117-1121 Access to fulltext document: PDF; IEEE Published version, local copy: PDF;
In : Applied Superconductivity Conference, Seattle, WA, USA, 27 Aug - 1 Sep 2006, pp.1117-1121

Detaljnije - Slični zapisi
2007-03-22
05:21
Radiological considerations on multi-MW targets Part I : Induced radioactivity / Agosteo, S (Politecnico di Milano, Italy) ; Magistris, M (CERN) ; Silari, M
CERN is designing a Superconducting Proton Linac (SPL) to provide a 2.2GeV, 4MW proton beam to feed facilities like, for example, a future Neutrino Factory or a Neutrino SuperBeam. The material activation in such facilities is an important aspect that has to be taken into account at an early design stage. [...]
2005 - Published in : Nucl. Instrum. Methods Phys. Res., A 545 (2005) 813-822

Detaljnije - Slični zapisi
2007-03-22
05:21
Radiological considerations on multi-MW targets Part II : After-heat and temperature distribution in packed tantalum spheres / Magistris, M (CERN)
CERN is designing a Superconducting Proton Linac (SPL) to provide a 2.2GeV, 4MW proton beam to feed facilities like, for example, a future Neutrino Factory or a Neutrino SuperBeam. One of the most promising target candidates is a stationary consisting of a Ti container filled with small Ta pellets. [...]
2005 - Published in : Nucl. Instrum. Methods Phys. Res., A 545 (2005) 823-9

Detaljnije - Slični zapisi